We use cookies to ensure the best experience on our website.

Measurement Services

Comprehensive testing and metrological certification of radio-electronic components and devices. Provides verification of electrical parameters, signal analysis, and environmental testing in accordance with industry standards.
Equipment
Measuring equipment by Rohde & Schwarz, Lynx Evo, and Reocam
Climatic testing range
from –70 °C to +150 °C
Spectral analysis frequency range
up to 43 GHz
up to ×250 magnification
Visual inspection of micro-defects
Functional capabilities
analysis of digital protocols, S-parameters
The Engineering Center for Radio-Electronic Instrumentation of the Saint Petersburg Technopark provides comprehensive measurement services for radio-electronic products and components. The service covers a wide range of tasks: from analog and digital signal analysis to visual inspection, microwave characterization and climatic testing.

Work is carried out using modern measuring and laboratory equipment. The Center utilizes digital oscilloscopes for protocol analysis (I²C, SPI, CAN, etc.), spectrum analyzers up to 43 GHz, network and power analyzers, microscopes for 3D assembly inspection, and a climatic chamber for evaluating device behavior under extreme conditions.

Based on measurement results, it is possible to prepare a detailed technical report, provide consultation on design modifications, and assist in preparation for mass production or certification.
Applications
Radio electronics development and debugging
Assembly and soldering quality control
Preparation for certification and production
R&D and laboratory testing
Workflow stages
Defining control parameters, selecting methods and equipment for a specific task.
Advantages
Measurements in the range up to 43 GHz
Analysis of digital protocols and microwave circuits
Climatic and visual testing
R&D and pilot production support
Case studies
    Cost
    Service name
    Cost
    For St. Petersburg SMEs (-20%)
    For St. Petersburg UAS R&D Center residents (-30%)
    Climatic testing of products using the REOCAM TCH-150-EtlEt2 heat-cold-moisture chamber. Humidity exposure. Base cycle 1 hour
    Climatic effects on products using the REOCAM TCH-150-EtlEt2 heat-cold and moisture unit. Exposure to temperatures without measurement of parameters and fitness criteria. Main cycle 1 hour
    Climatic effects on products using the REOCAM TCH-150-EtlEt2 heat-cold and moisture unit. Exposure to temperatures with measurement of parameters and fitness criteria. Main cycle 1 hour
    1,600 ₽
    1,400 ₽
    2,400 ₽
    1,280 ₽
    1,280 ₽
    1 920 ₽
    1,120 ₽
    980 ₽
    1,680 ₽
    Measurements using the RTC 1002 digital oscilloscope, without parameter limitations, 1 hour, with report
    2,000 ₽
    1,600 ₽
    1,400 ₽
    Measurements using the RTC 1002 digital oscilloscope, without parameter limitations, 1 hour, without report
    1,500 ₽
    1,200 ₽
    1,050 ₽
    Measurements using the RTB 2002 digital oscilloscope, no parameter limits, 1 hour, with report
    2,000 ₽
    1,600 ₽
    1,400 ₽
    Measurements using the RTB 2002 digital oscilloscope, no parameter limits, 1 hour, without report
    1,500 ₽
    1,200 ₽
    1,050 ₽
    Measurements using the NRP33S power sensor, no parameter limits, 1 hour, with report
    2,000 ₽
    1,600 ₽
    1,400 ₽
    Measurements using the NRP33S power sensor, no parameter limits, 1 hour, without report
    1,600 ₽
    1,280 ₽
    1,120 ₽
    Measurements using the GDM-79061 voltmeter, no parameter limits, 1 hour, with report
    1,900 ₽
    1,520 ₽
    1,330 ₽
    Measurements using the GDM-79061 voltmeter, no parameter limits, 1 hour, without report
    1,500 ₽
    1,200 ₽
    1,050 ₽
    Measurements using the RTO 2044 digital oscilloscope, no parameter limits, 1 hour, with report
    3,200 ₽
    2,560 ₽
    2,240 ₽
    Measurements using the RTO 2044 digital oscilloscope, no parameter limits, 1 hour, without report
    2,800 ₽
    2,240 ₽
    1,960 ₽
    Measurements using the ZNB40 vector network analyzer, no parameter limits, 1 hour, with report
    3,400 ₽
    2,720 ₽
    2,380 ₽
    Measurements using the ZNB40 vector network analyzer, no parameter limits, 1 hour, without report
    3,000 ₽
    2,400 ₽
    2,100 ₽
    Measurements using the FPL1003 spectrum analyzer, no parameter limits, 1 hour, with report
    1,800 ₽
    1,440 ₽
    1,260 ₽
    Measurements using the FPL1003 spectrum analyzer, no parameter limits, 1 hour, without report
    1,500 ₽
    1,200 ₽
    1,050 ₽
    Measurements using NRQ6 frequency selective power sensor, no parameter limits, 1 hour, with report
    1,900 ₽
    1,520 ₽
    1,330 ₽
    Measurements using NRQ6 frequency selective power sensor, no parameter limits, 1 hour, no report
    1,500 ₽
    1,200 ₽
    1,050 ₽
    Measurements on R&S FSW43 spectrum analyzer, single-function measurement, with report
    890 ₽
    712 ₽
    623 ₽
    Measurements on R&S FSW43 spectrum analyzer, single-function measurement, no report
    670 ₽
    536 ₽
    469 ₽
    Measurements on R&S FSW43 spectrum analyzer, no parameter limits, 1 hour, with report
    3,700 ₽
    2,960 ₽
    2,590 ₽
    Measurements on R&S FSW43 spectrum analyzer, no parameter limits, 1 hour, no report
    3,400 ₽
    2,720 ₽
    2,380 ₽
    Measurements of device characteristics in a closed volume using DST200 diagonal anechoic RF chamber, 1 hour, primary cycle
    720 ₽
    576 ₽
    504 ₽
    Signal reception using HF907 broadband linearly polarized measurement antenna, 1 hour
    2,000 ₽
    1,600 ₽
    1,400 ₽
    Visual inspection of the product on EvoCam II digital microscope, 1 hour, with report
    1,900 ₽
    1,520 ₽
    1,330 ₽
    Visual inspection of the product on EvoCam II digital microscope, 1 hour, without report
    1,600 ₽
    1,280 ₽
    1,120 ₽
    Visual inspection of the object using Lynx Evo eyepiece-less stereomicroscope, 1 hour, with report
    2,100 ₽
    1,680 ₽
    1,470 ₽
    Visual inspection of the object using Lynx Evo eyepiece-less stereomicroscope, 1 hour, without report
    1,600 ₽
    1,280 ₽
    1,120 ₽

    Order service

    Contacts

    Irina Kostenko
    Director of the Regional Engineering Center for Radio-Electronic Instrumentation of the Saint Petersburg Technopark
    i.kostenko@spbtech.ru
    +7 (812) 670-10-85 (ext. 309)
    Address
    30 Zanevsky Ave, Bldg 2
    Map
    Similar services